| PRIME CONTRACTOR | SPECIFICATION | PROCESS | CODE | Limitations | Notes |
| APPROVALS: | |||||
| BOEING | ASTM-B-117 | Salt Spray Testing | 810 | ||
| BOEING | ASTM-E-1417 | Penetrant Inspection | 411 | ||
| BOEING | ASTM-E-1444 | Magnetic Particle Inspection | 402 | ||
| BOEING | BAC 5019 | Chromic Acid Anodizing - Class 1 and 4 | 304 | ||
| BOEING | BAC 5019 | Chromic Acid Anodizing - Class 1 and 3 | 305 | ||
| BOEING | BAC 5019 | Chromic Acid Anodizing - Class 5 | 317 | A5 PO authority reqd to substitue Class V for I or III | |
| BOEING | BAC 5022 | Sulfuric Acid Anodizing | 306 | Grade A only | |
| BOEING | BAC 5423 | Penetrant Inspection | 410 | ||
| BOEING | BAC 5424 | Magnetic Particle Inspection | 400 | ||
| BOEING | BAC 5436 | Etch Inspection of Ground or Machined Steel Parts | 441 | ||
| BOEING | BAC 5617 | Heat Treat of Alloy Steels | 101 | H5 Limited to stress relief and/or embrittlement relief | |
| BOEING | BAC 5619 | Heat Treat of Corrosion Resistant Steel | 131 | H5 Limited to stress relief and/or embrittlement relief | |
| BOEING | BAC 5626 | Colored Chem Conversion Coatings for Alum Immersion App only | 325 | ||
| BOEING | BAC 5632 | Boric Acid - Sulfuric Acid Anodizing Class 1 | 315 | ||
| BOEING | BAC 5665 | Applicaton of Sol-Gel Conversion Coatings on Corrosion Resistant Alloys for Painting | 323 | ||
| BOEING | BAC 5719 | Chemical Conversion Coatings for Aluminum (Immersion Application Only) | 321 | ||
| BOEING | BAC 5730 | Shot Peening | 506 | ||
| BOEING | BAC 5753 | Cleaning - Descaling of Titanium - Method II Only | 510 | ||
| BOEING | BAC 5793 | Application Corrosion Resistant Finish for Integral Fuel Tanks - manual touch-up excluded for requiring approval | 392 | ||
| BOEING | BAC 5810 | Phosphate Conversion Coating on Steel | 332 | ||
| BOEING | BAC 5821 | Hard Anodizing - Class 1 and 2 | 308 | ||
| BOEING | BAC 5861 | Phosphate Fluoride Coatings - Titanium | 383 | ||
| BOEING | BAC 5946 | Temper Inspection of Non-ferrous alloys | 806 | ||
| BOEING | BAC 5951 | Glass Bead Peening | 505 | ||
| BOEING | BSS 7039 | Liquid Penetrant Inspection | 410A | ||
| BOEING | BSS 7040 | Magnetic Particle Inspection | 400A | ||
| BOEING | BSS 7698 | NDI Personnel Certification Level III Magnetic | 848 | ||
| BOEING | BSS 7698 | NDI Personnel Certification Level III Penetrant | 849 | ||
| BOEING | Chem. Testing | Process Solution Control | 809 | Internal Support Only | |
| BOEING | Mech. Testing | Mechanical Testing - Metallic | 802 | Metallic Materials only | Impact tester only |
| BOEING | MIL-A-8625 | Chromic Acid Anodizing of Alum. - Type I | 300 | ||
| BOEING | MIL-A-8625 | Sulfuric Acid Anodize Type II | 306 | ||
| BOEING | MIL-A-8625 | Hard Anodize Type III | 302 | ||
| BOEING | MIL-C-5541 | Chemical Conversion Coating on Aluminum (Immersion App only) (Approval Not Required for International Space Station (ISS) Houston Only) | 320 | C1A Class 1A | |
| BOEING | MIL-DTL-5541 | Chemical Conversion Coating on Aluminum (Immersion App only) | 320B | C1A Class 1A | |
| BOEING | MIL-I-6866 | Penetrant Inspection | 413 | ||
| BOEING | MIL-I-6868 | Magnetic Particle Inspection | 404 | ||
| BOEING | MIL-S-13165 | Shot Peening | 503 | ||
| BOEING | MIL-STD-1949 | Magnetic Particle Inspection | 403 | ||
| BOEING | MIL-STD-410 | NDI Personnel Certification Level III Magnetic | 848A | ||
| BOEING | MIL-STD-410 | NDI Personnel Certification Level III Penetrant | 849B | ||
| BOEING | MIL-STD-6866 | Penetrant Inspection | 412 | ||
| BOEING | NAS 410 | NDI Personnel Certification Level III Magnetic | 848A | ||
| BOEING | NAS 410 | NDI Personnel Certification Level III Penetrant | 849A | ||
| BOEING | Quality System | Processor Basic Quality System for D1-4426 approval only | 001 | ||
| BOEING - LONG BEACH | DPS 11.01 | Chromic Acid Anodizing | L304 | ||
| BOEING - LONG BEACH | DPS 11.01-3 | Chromic Acid Anodizing - Chromate Sealed | L304B | ||
| BOEING - LONG BEACH | DPS 11.04 | Hard Anodizing - Aluminum | L308 | ||
| BOEING - LONG BEACH | DPS 11.05 | Sulfuric Acid Anodizing | L306 | ||
| BOEING - LONG BEACH | DPS 11.05-1 | Sulfuric Acid Anodizing - Controlled Thickness | L306A | ||
| BOEING - LONG BEACH | DPS 11.05-2 | Sulfuric Acid Anodizing - Thin Film | L306B | ||
| BOEING - LONG BEACH | DPS 4.704 | Magnetic Particle Inspection | L400 | ||
| BOEING - LONG BEACH | DPS 4.707 | Penetrant Inspection | L410 | ||
| BOEING - LONG BEACH | DPS 4.715 | Etch Inspection - Machined / Ground Steel | L441 | ||
| BOEING - LONG BEACH | DPS 4.999 | Shot Peening - Metal Parts | L500 | ||
| BOEING - LONG BEACH | DPS 9.45 | Coating-Colorless Chemical Surface Treatment of Aluminum Alloys (Immersion Application Only) | L322 | ||
| BOEING - LONG BEACH | DPS 9.45 | Coating-Multicolored Chemical Surface Treatment of Aluminum Alloys (Immersion Application Only) | L325 | ||
| BOEING - MESA | EPB 4-232 | Paint Application of, to the AH–64 Helicopter | Approved excluding application of Finish N | ||
| BOEING - MESA | EPB 4-235 | Finish Specification for Light Helicopters | |||
| BOEING - MESA | EPB 4-237 | Finish Specification for Paint, Application of, to the Leading Edge Flap and Leading Edge Extension Antennas for F/A-18E/F Aircraft | Limited to Application of Primer & Topcoat Only. Boeing orders must be processed in area not used for dry film lube. | ||
| BOEING - MESA | HP 4-57 | Chemical Film - Aluminum (Immersion Application Only) | M325 | ||
| BOEING - MESA | HP 6-5 | Magnetic Particle Inspection | M400 | ||
| BOEING - MESA | HP 6-13 | Penetrant Inspection - Fluorescent | M410A | ||
| BOEING ST. LOUIS | P.S. 13201 | Anodizing Aluminum | S304 | ||
| BOEING ST. LOUIS | P.S. 13202 | Coatings - Colorless Chemical Surface Treatment of Aluminum Alloys (Immersion Application Only) | S322 | ||
| BOEING ST. LOUIS | P.S. 13208 | Hard Coat - Aluminum | S306 | ||
| BOEING ST. LOUIS | P.S. 13209 | Coating - Multicolored Chemical Conversion of Aluminum Alloys by Immersion | S325 | ||
| BOEING ST. LOUIS | P.S. 14023 | Peening | S500 | ||
| BOEING ST. LOUIS | P.S. 18021 | Application - Dry Film Lubricant | S391 | ||
| BOEING ST. LOUIS | P.S. 21201 | Magnetic Particle Inspection | S400 | ||
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Aluminum | S410A | ||
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Cobalt - Nickel | S410C | ||
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Low Alloy Steels | S410E | ||
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Stainless Steels | S410H | ||
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Titanium | S410J | ||
| PAINT AND ORGANIC COATING SPECIFICATIONS, NO APPROVAL REQUIRED: | |||||
| BOEING | BAC 5325 | Application of Nonchromated Primer on Composite, Plastic, Titanium and Cres Surfaces | |||
| BOEING | BAC 5706 | Application of Organic Finishes | |||
| BOEING | BAC 5710 | Application of Special Purpose Coatings | |||
| BOEING | BAC 5736 | Application of Chemical and Solvent Resistant Finishes | |||
| BOEING | BAC 5755 | Application of Interior Decorative Finishes | |||
| BOEING | BAC 5756 | Application of Heat-Treat Protective Coatings - Type IV | |||
| BOEING | BAC 5777 | Wash Primer, Application of | |||
| BOEING | BAC 5793 | Application of Corrosion Resistant Finish for Integral Fuel Tanks | |||
| BOEING | BAC 5807 | Application of High Temperature Epoxy Primer | |||
| BOEING | BAC 5845 | Application of Polyurethane Enamel | |||
| BOEING | BAC 5882 | Application of Urethane Compatible Primer | |||
| BOEING | BAC 5896 | Application of Aliphatic Isocyanate Polyurethane Enamel | |||
| BOEING | D210-12056-1 | Application of MIL-C-46168 Aliphatic Polyurethane Coating (Chemical Agent Resistant) | |||
| BOEING | D210-12534-1 | Coating System, Epoxy-Polyamide, Chemical and Solvent Resistant: Process for Application of | |||
| BOEING - LONG BEACH | DPS 4.301 | Internal Protection of Hollow Members | |||
| BOEING - LONG BEACH | DPS 4.50-127 | Fuel Tank Coating | |||
| BOEING - LONG BEACH | DPS 4.50-131 | Coating, Anti-Chafe | |||
| BOEING - LONG BEACH | DPS 4.50-165 | Aliphatic Polyurethane Coating DMS 2115 | |||
| BOEING - LONG BEACH | DPS 4.50-165-17 | Polyurethane Coating DMS 2115 | |||
| BOEING - LONG BEACH | DPS 4.50-168 | Heat Resistant Urethane Coating | |||
| BOEING - LONG BEACH | DPS 4.50-36 | Epoxy (FR) Coating System | |||
| BOEING - LONG BEACH | DPS 4.50-36-17 | Epoxy (FR) Coating System | |||
| BOEING - LONG BEACH | DPS 4.50-62 | Impact Resistant Coating System | |||
| BOEING - ST. LOUIS | P.S. 13318 | Painting of Aerospace Ground Equipment (AGE) | |||
| BOEING - ST. LOUIS | P.S. 13375 | Application of Epoxy Primer | |||
| BOEING - ST. LOUIS | P.S. 13517 | Painting of Douglas Commercial, C-17, T-38 and T-45 Aircraft | |||
| BOEING - ST. LOUIS | P.S. 13525 | Polyurethane Corrosion Resistant Coating, Spray Application of | |||
| BOEING - ST. LOUIS | P.S. 13550.1 | Coating system, Epoxy (FR), Application of, for Douglas Commercial and C-17 Aircraft | |||
| BOEING - ST. LOUIS | P.S. 13553 | Impact Resistant Coating System | |||
| BOEING - ST. LOUIS | P.S. 13555 | Coating, Anti-Chafe | |||
| BOEING - ST. LOUIS | P.S. 13560 | Heat Resistant Urethane Coating (Douglas Commercial and C-17 Aircraft) | |||
| BOEING - ST. LOUIS | P.S. 13630 | Painting of F/A-18 and AV-8 Aircraft | |||
| BOEING - ST. LOUIS | P.S. 13630.1 | Painting at Detail and Assembly Level | |||
| BOEING - ST. LOUIS | P.S. 13646 | Painting of F-15 Aircraft | |||
| BOEING - ST. LOUIS | P.S. 13646.1 | Finishes for Missiles and Associated Equipment | |||
| OTHER PROCESSES - NO APPROVAL REQUIRED: | |||||
| BOEING | BAC 5625 | Surface Treatments for Ferrous Alloys | |||
| BOEING | BAC 5748 | Abrasive Cleaning, Deburring, and Finishing | |||
| BOEING | BAC 5756 | Application of Heat-Treat Protective Coatings - Type IV | |||
| BOEING | BAC 5786 | Etch Cleaning of Aluminum Alloys | |||
| BOEING | BAC 5811 | Dry Film Lubricant - Excluding Type VIII | Excluding Type VIII | ||
| BOEING - LONG BEACH | DPS 3.177 | Solid Film Lubricants | See P.S. 18059 | ||
| BOEING - LONG BEACH | DPS 9.05 | Cleaning of Carbon Steels and Low Alloy Steels | |||
| BOEING - LONG BEACH | DPS 9.07 | Surface Treatment of Corrosion Resistant Steel | |||
| BOEING - LONG BEACH | DPS 9.29 | Surface Treatments of Titanium | |||
| BOEING - LONG BEACH | DPS 9.301 | Cleaning Aluminum Alloys | |||
| BOEING - MESA | EPB 4-230 | Finish Specification for AH-64 Advanced Attack Helicopter | |||
| BOEING - MESA | HP 4-107 | Paint System for Light Helicopter Aircraft, Application of | |||
| BOEING - MESA | HP 9-1 | Abrasive Cleaning Methods for Metallic and Nonmetallic Parts | |||
| BOEING - MESA | HP 9-5 | Chemical Cleaning Methods for Metallic Parts | |||
| BOEING - MESA | HP 9-24 | Aluminum, Cleaning of, Prior to Penetrant | |||
| BOEING - ST. LOUIS | P.S. 13001 | Passivation of Corrosion and Heat Resisting Alloys | |||
| BOEING - ST. LOUIS | P.S. 18059 | Preparation and Application of Solid Film Lubricants (DPS 3.177) | This specification shall be used whenever DPS 3.177 is specified on an Engineering drawing/model or is specified by another process specification | ||
| BOEING - ST. LOUIS | P.S. 12030 | Cleaning, Alkaline | |||
| BOEING - ST. LOUIS | P.S. 12040 | Cleaning, Abrasive | |||
| BOEING - ST. LOUIS | P.S. 12050.1 | Pickling Aluminum Alloys | |||
| BOEING - ST. LOUIS | P.S. 12050.5 | Pickling Stainless Steel | |||
| BOEING - ST. LOUIS | P.S. 12050.6 | Pickling Titanium and Titanium Alloys | |||
| BOEING - ST. LOUIS | P.S. 12050.8 | Pickling Low Alloy Steels | |||
| BOEING - ST. LOUIS | P.S. 13204 | Conversion Coating, Brush and Spray | |||