| PRIME CONTRACTOR | SPECIFICATION | PROCESS | CODE |
| APPROVALS: | |||
| BOEING | ASTM-B-117 | Salt Spray Testing | 810 |
| BOEING | ASTM-E-1417 | Penetrant Inspection | 411 |
| BOEING | ASTM-E-1444 | Magnetic Particle Inspection | 402 |
| BOEING | BAC 5019 | Chromic Acid Anodizing - Class 1 and 4 | 304 |
| BOEING | BAC 5019 | Chromic Acid Anodizing - Class 1 and 3 | 305 |
| BOEING | BAC 5019 | Chromic Acid Anodizing - Class 5 | 317 |
| BOEING | BAC 5022 | Sulfuric Acid Anodizing | 306 |
| BOEING | BAC 5423 | Penetrant Inspection | 410 |
| BOEING | BAC 5424 | Magnetic Particle Inspection | 400 |
| BOEING | BAC 5436 | Etch Inspection of Ground or Machined Steel Parts | 441 |
| BOEING | BAC 5617 | Heat Treat of Alloy Steels | 101 |
| BOEING | BAC 5619 | Heat Treat of Corrosion Resistant Steel | 131 |
| BOEING | BAC 5626 | Colored Chem Conversion Coatings for Alum Immersion App only | 325 |
| BOEING | BAC 5632 | Boric Acid - Sulfuric Acid Anodizing Class 1 | 315 |
| BOEING | BAC 5665 | Applicaton of Sol-Gel Conversion Coatings on Corrosion Resistant Alloys for Painting | 323 |
| BOEING | BAC 5719 | Chemical Conversion Coatings for Aluminum (Immersion Application Only) | 321 |
| BOEING | BAC 5730 | Shot Peening | 506 |
| BOEING | BAC 5753 | Cleaning - Descaling of Titanium - Method II Only | 510 |
| BOEING | BAC 5793 | Application Corrosion Resistant Finish for Integral Fuel Tanks - manual touch-up excluded for requiring approval | 392 |
| BOEING | BAC 5810 | Phosphate Conversion Coating on Steel | 332 |
| BOEING | BAC 5821 | Hard Anodizing - Class 1 and 2 | 308 |
| BOEING | BAC 5861 | Phosphate Fluoride Coatings - Titanium | 383 |
| BOEING | BAC 5884 | Anodizing of Aluminum Alloys | 313 |
| BOEING | BAC 5946 | Temper Inspection of Non-ferrous alloys | 806 |
| BOEING | BAC 5951 | Glass Bead Peening | 505 |
| BOEING | BSS 7039 | Liquid Penetrant Inspection | 410A |
| BOEING | BSS 7040 | Magnetic Particle Inspection | 400A |
| BOEING | BSS 7698 | NDI Personnel Certification Level III Magnetic | 848 |
| BOEING | BSS 7698 | NDI Personnel Certification Level III Penetrant | 849 |
| BOEING | Chem. Testing | Process Solution Control | 809 |
| BOEING | Mech. Testing | Mechanical Testing - Metallic | 802 |
| BOEING | MIL-A-8625 | Chromic Acid Anodizing of Alum. - Type I | 300 |
| BOEING | MIL-A-8625 | Sulfuric Acid Anodize Type II | 306 |
| BOEING | MIL-A-8625 | Hard Anodize Type III | 302 |
| BOEING | MIL-C-5541 | Chemical Conversion Coating on Aluminum (Immersion App only) (Approval Not Required for International Space Station (ISS) Houston Only) | 320 |
| BOEING | MIL-DTL-5541 | Chemical Conversion Coating on Aluminum (Immersion App only) | 320B |
| BOEING | MIL-I-6866 | Penetrant Inspection | 413 |
| BOEING | MIL-I-6868 | Magnetic Particle Inspection | 404 |
| BOEING | MIL-S-13165 | Shot Peening | 503 |
| BOEING | MIL-STD-1949 | Magnetic Particle Inspection | 403 |
| BOEING | MIL-STD-410 | NDI Personnel Certification Level III Magnetic | 848A |
| BOEING | MIL-STD-410 | NDI Personnel Certification Level III Penetrant | 849B |
| BOEING | MIL-STD-6866 | Penetrant Inspection | 412 |
| BOEING | NAS 410 | NDI Personnel Certification Level III Magnetic | 848A |
| BOEING | NAS 410 | NDI Personnel Certification Level III Penetrant | 849A |
| BOEING | Quality System | Processor Basic Quality System for D1-4426 approval only | 001 |
| BOEING - LONG BEACH | DPS 11.01 | Chromic Acid Anodizing | L304 |
| BOEING - LONG BEACH | DPS 11.01-3 | Chromic Acid Anodizing - Chromate Sealed | L304B |
| BOEING - LONG BEACH | DPS 11.04 | Hard Anodizing - Aluminum | L308 |
| BOEING - LONG BEACH | DPS 11.05 | Sulfuric Acid Anodizing | L306 |
| BOEING - LONG BEACH | DPS 11.05-1 | Sulfuric Acid Anodizing - Controlled Thickness | L306A |
| BOEING - LONG BEACH | DPS 11.05-2 | Sulfuric Acid Anodizing - Thin Film | L306B |
| BOEING - LONG BEACH | DPS 4.704 | Magnetic Particle Inspection | L400 |
| BOEING - LONG BEACH | DPS 4.707 | Penetrant Inspection | L410 |
| BOEING - LONG BEACH | DPS 4.715 | Etch Inspection - Machined / Ground Steel | L441 |
| BOEING - LONG BEACH | DPS 4.999 | Shot Peening - Metal Parts | L500 |
| BOEING - LONG BEACH | DPS 9.45 | Coating-Colorless Chemical Surface Treatment of Aluminum Alloys (Immersion Application Only) | L322 |
| BOEING - LONG BEACH | DPS 9.45 | Coating-Multicolored Chemical Surface Treatment of Aluminum Alloys (Immersion Application Only) | L325 |
| BOEING - MESA | EPB 4-232 | Paint Application of, to the AH–64 Helicopter | |
| BOEING - MESA | EPB 4-235 | Finish Specification for Light Helicopters | |
| BOEING - MESA | EPB 4-237 | Finish Specification for Paint, Application of, to the Leading Edge Flap and Leading Edge Extension Antennas for F/A-18E/F Aircraft | |
| BOEING - MESA | HP 4-57 | Chemical Film - Aluminum (Immersion Application Only) | M325 |
| BOEING - MESA | HP 6-5 | Magnetic Particle Inspection | M400 |
| BOEING - MESA | HP 6-13 | Penetrant Inspection - Fluorescent | M410A |
| BOEING ST. LOUIS | P.S. 13201 | Anodizing Aluminum | S304 |
| BOEING ST. LOUIS | P.S. 13202 | Coatings - Colorless Chemical Surface Treatment of Aluminum Alloys (Immersion Application Only) | S322 |
| BOEING ST. LOUIS | P.S. 13208 | Hard Coat - Aluminum | S306 |
| BOEING ST. LOUIS | P.S. 13209 | Coating - Multicolored Chemical Conversion of Aluminum Alloys by Immersion | S325 |
| BOEING ST. LOUIS | P.S. 14023 | Peening | S500 |
| BOEING ST. LOUIS | P.S. 18021 | Application - Dry Film Lubricant | S391 |
| BOEING ST. LOUIS | P.S. 21201 | Magnetic Particle Inspection | S400 |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Aluminum | S410A |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Cobalt - Nickel | S410C |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Low Alloy Steels | S410E |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Stainless Steels | S410H |
| BOEING ST. LOUIS | P.S. 21202 | Penetrant Inspection - Titanium | S410J |
| PAINT AND ORGANIC COATING SPECIFICATIONS, NO APPROVAL REQUIRED: | |||
| BOEING | BAC 5325 | Application of Nonchromated Primer on Composite, Plastic, Titanium and Cres Surfaces | |
| BOEING | BAC 5706 | Application of Organic Finishes | |
| BOEING | BAC 5710 | Application of Special Purpose Coatings | |
| BOEING | BAC 5736 | Application of Chemical and Solvent Resistant Finishes | |
| BOEING | BAC 5755 | Application of Interior Decorative Finishes | |
| BOEING | BAC 5756 | Application of Heat-Treat Protective Coatings - Type IV | |
| BOEING | BAC 5777 | Wash Primer, Application of | |
| BOEING | BAC 5793 | Application of Corrosion Resistant Finish for Integral Fuel Tanks | |
| BOEING | BAC 5807 | Application of High Temperature Epoxy Primer | |
| BOEING | BAC 5845 | Application of Polyurethane Enamel | |
| BOEING | BAC 5882 | Application of Urethane Compatible Primer | |
| BOEING | BAC 5896 | Application of Aliphatic Isocyanate Polyurethane Enamel | |
| BOEING | D210-12056-1 | Application of MIL-C-46168 Aliphatic Polyurethane Coating (Chemical Agent Resistant) | |
| BOEING | D210-12534-1 | Coating System, Epoxy-Polyamide, Chemical and Solvent Resistant: Process for Application of | |
| BOEING - LONG BEACH | DPS 4.301 | Internal Protection of Hollow Members | |
| BOEING - LONG BEACH | DPS 4.50-127 | Fuel Tank Coating | |
| BOEING - LONG BEACH | DPS 4.50-131 | Coating, Anti-Chafe | |
| BOEING - LONG BEACH | DPS 4.50-165 | Aliphatic Polyurethane Coating DMS 2115 | |
| BOEING - LONG BEACH | DPS 4.50-165-17 | Polyurethane Coating DMS 2115 | |
| BOEING - LONG BEACH | DPS 4.50-168 | Heat Resistant Urethane Coating | |
| BOEING - LONG BEACH | DPS 4.50-36 | Epoxy (FR) Coating System | |
| BOEING - LONG BEACH | DPS 4.50-36-17 | Epoxy (FR) Coating System | |
| BOEING - LONG BEACH | DPS 4.50-62 | Impact Resistant Coating System | |
| BOEING - ST. LOUIS | P.S. 13318 | Painting of Aerospace Ground Equipment (AGE) | |
| BOEING - ST. LOUIS | P.S. 13375 | Application of Epoxy Primer | |
| BOEING - ST. LOUIS | P.S. 13517 | Painting of Douglas Commercial, C-17, T-38 and T-45 Aircraft | |
| BOEING - ST. LOUIS | P.S. 13525 | Polyurethane Corrosion Resistant Coating, Spray Application of | |
| BOEING - ST. LOUIS | P.S. 13550.1 | Coating system, Epoxy (FR), Application of, for Douglas Commercial and C-17 Aircraft | |
| BOEING - ST. LOUIS | P.S. 13553 | Impact Resistant Coating System | |
| BOEING - ST. LOUIS | P.S. 13555 | Coating, Anti-Chafe | |
| BOEING - ST. LOUIS | P.S. 13560 | Heat Resistant Urethane Coating (Douglas Commercial and C-17 Aircraft) | |
| BOEING - ST. LOUIS | P.S. 13630 | Painting of F/A-18 and AV-8 Aircraft | |
| BOEING - ST. LOUIS | P.S. 13630.1 | Painting at Detail and Assembly Level | |
| BOEING - ST. LOUIS | P.S. 13646 | Painting of F-15 Aircraft | |
| BOEING - ST. LOUIS | P.S. 13646.1 | Finishes for Missiles and Associated Equipment | |
| OTHER PROCESSES - NO APPROVAL REQUIRED: | |||
| BOEING | BAC 5625 | Surface Treatments for Ferrous Alloys | |
| BOEING | BAC 5748 | Abrasive Cleaning, Deburring, and Finishing | |
| BOEING | BAC 5756 | Application of Heat-Treat Protective Coatings - Type IV | |
| BOEING | BAC 5786 | Etch Cleaning of Aluminum Alloys | |
| BOEING | BAC 5811 | Dry Film Lubricant - Excluding Type VIII | |
| BOEING - LONG BEACH | DPS 3.177 | Solid Film Lubricants | |
| BOEING - LONG BEACH | DPS 9.05 | Cleaning of Carbon Steels and Low Alloy Steels | |
| BOEING - LONG BEACH | DPS 9.07 | Surface Treatment of Corrosion Resistant Steel | |
| BOEING - LONG BEACH | DPS 9.29 | Surface Treatments of Titanium | |
| BOEING - LONG BEACH | DPS 9.301 | Cleaning Aluminum Alloys | |
| BOEING - MESA | EPB 4-230 | Finish Specification for AH-64 Advanced Attack Helicopter | |
| BOEING - MESA | HP 4-107 | Paint System for Light Helicopter Aircraft, Application of | |
| BOEING - MESA | HP 9-1 | Abrasive Cleaning Methods for Metallic and Nonmetallic Parts | |
| BOEING - MESA | HP 9-5 | Chemical Cleaning Methods for Metallic Parts | |
| BOEING - MESA | HP 9-24 | Aluminum, Cleaning of, Prior to Penetrant | |
| BOEING - ST. LOUIS | P.S. 13001 | Passivation of Corrosion and Heat Resisting Alloys | |
| BOEING - ST. LOUIS | P.S. 18059 | Preparation and Application of Solid Film Lubricants (DPS 3.177) | |
| BOEING - ST. LOUIS | P.S. 12030 | Cleaning, Alkaline | |
| BOEING - ST. LOUIS | P.S. 12040 | Cleaning, Abrasive | |
| BOEING - ST. LOUIS | P.S. 12050.1 | Pickling Aluminum Alloys | |
| BOEING - ST. LOUIS | P.S. 12050.5 | Pickling Stainless Steel | |
| BOEING - ST. LOUIS | P.S. 12050.6 | Pickling Titanium and Titanium Alloys | |
| BOEING - ST. LOUIS | P.S. 12050.8 | Pickling Low Alloy Steels | |
| BOEING - ST. LOUIS | P.S. 13204 | Conversion Coating, Brush and Spray | |
Customer Portal
ONLINE STATUS REPAIRED
THANK YOU FOR YOUR PATIENCE AS WE WORKED TO RESTORE OUR SYTEM.
Virtual Tour
Poll